cikakken bayani:

Model No.: ZY-CMTLC (Custom kayayyaki), bayanin girma: 800 * 500 * 650mm;

Baken karfe hanger kabinet, hanging bango locker, baken karfe bango kabinet, amfani da ingancin baken karfe farantin, mafi yawa don guda-layer sarari, bude ko jan ƙofar style, hanger size, model da kuma farantin kauri da aka tsara bisa ga ainihin bukatun abokin ciniki.

Baken karfe hanging kabinet (bango kabinet, baken karfe lockers ）

Kayayyakin da yawa musamman bisa ga abokin ciniki bukatun (takardar bayanai, takardar kauri, tsarin siffar, guda ko biyu Layer, bude ƙofar style, ceiling cabinet size)

ajiya kabinet, hangar kabinet

4.1 Wannan misali ya ƙayyade fasaha bukatun bakin karfe ajiya kabinet, hangar kabinet, gwaji hanyoyin, gwaji dokokin.

4.2 fasaha bukatun

4.2.1 ajiya kabinet, hangar kabinetAna amfani da bakin karfe albarkatun kasa ya kamata ya dace daKai3280Dokokin da suka dace da tsakiyar austenitic size bakin karfe.

4.2.2 ajiya kabinet, hangar kabinetBayan polishing farfajiyar texture ya kamata daidai, waje farfajiyar roughness ya kamata ya dace da samfurin, kuma ba ya kamata a bayyana scratches, hammer alama da kuma burns.

4.2.3 ajiya kabinet, hangar kabinetKowane haɗin sassa ya kamata ya kasance mai ƙarfi, da walda layi daidai, ba a yarda da rashin walda, fashewa da sauran lahani ba, da kuma bayyanar walda seams ya kamata a polish ko de-launi.

4.2.4 ajiya kabinet, hangar kabinetFasteners na kowane haɗi sassa ya kamata a matsayi daidai, haɗi karfi.

4.2.5 ajiya kabinet, hangar kabinetBa a yarda da kusurwa da burrs a wuraren da aka tuntuɓi jikin mutum ba.

4.2.6iyakar karkatarwa na girman siffar ±3mm.

4.2.7Tsaye na gefen da ke kusa ba ya fi girma fiye da5 mm.

4.2.8Daidaitaccen ƙafa ya kamata ya kasance mai ƙarfi da sassauci.

4.2.9Kabinet kofofin da drawer bude da sassauci, babu wani m noise.

4.2.10Shelves da kuma bottom board ya kamata su iya jure25kgLoad, da karkatarwa ya kamata kasa da3mm.

4.3 Binciken ingancin bayyanar

4.3.1Aika4.2.2、4.2.3、4.2.4、4.2.5、4.2.8、4.2.9Bar amfani da hannu, gani gwaji.

4.3.2Binciken nau'i na size tolerance4.2.6Bar dubawa da karfe coil gauge ko karfe madaidaiciya gauge.

4.3.3Binciken nau'i na siffar tolerance4.2.7Bar amfani90Degree angle gwaji.

4.3.4daukar gwaji

Ka sanya kayayyakin a cikin al'ada amfani da yanayin da aka sanya daban-daban a tsakiyar sassa na shelves da bottom panel500×500mmThe katako board, a kan wanda aka sanya daban-daban50kgnauyi abubuwa, tsayayye1hBayan bincika kofofin majalisar, rufe yanayin firiji, bayan cire nauyi abubuwa, auna adadin tsaye shugabanci karkatarwa a kai jirgin sama diagonal junction.

4.4 Alamar, marufi, ajiya

4.4.1Alamar

Kayayyakin ya kamata su sami alama, alamar ya kamata ta haɗa da alamar kasuwanci, sunan samfurin, ƙididdigar samfurin, sunan masana'antar masana'antu da kwanan watan masana'antu.

4.4.2Kunshin

ajiya kabinet, hangar kabinetTa roba jaka, katon, katako akwati marufi ko kamar yadda mai amfani bukatun, kayayyakin marufi ya kamata ya dace da amfani da sufuri. Ya kamata a sami alama a waje da marufi na hukuma, alamar ta haɗa da sunan samfurin, masana'antun, ƙididdigar samfurin, nauyi, girman, kwanan wata na marufi, da sauransu.

4.5 Cika samfurin dubawa bayan dubawa da sanya hannu