Low zafin jiki plasma surface treatment kayan aiki ya ƙunshi injin rumbun da kuma high mita plasma ikon samar da, pumping injin tsarin, inflatable tsarin, atomatik sarrafa tsarin da sauransu sassa zama. Ka'idar aiki ita ce a cikin yanayin inji, aikin plasma yana iya ionizing gas a ƙarƙashin hanyoyin sarrafawa da inganci, amfani da injin famfo za a yi studio don famfo injin ya kai 30-40pa injin digiri, sa'an nan a karkashin high mita janareta aikin, gas don ionization, samar da plasma (abu na huɗu yanayin), da muhimmanci halaye ne high uniformity haske fitarwa, bisa ga daban-daban gas fitar da launi mai gani haske daga shuɗi zuwa zurfi shudu, kayan aiki zafin jiki kusa da dakin zafin jiki. Wadannan sosai aiki microparticles da kuma magani surface yi aiki, samun surface hydrophilicity, ruwa resistant, low gogewa, sosai tsabtace, kunnawa, etching da sauran daban-daban surface gyare-gyare.

fasaha sigogi

1 kumaSize na'urar: 450mm*400mm*240mm

2 kumainjin gudanarwa size: Φ151×300(L)mm （5L）

3 kumaTsarin Warehouse: Bakin karfe rumbun, built-in abun ciki haɗuwa lantarki, babu gurɓataccen, gina-in kwartas tray.

4 kumaPlasma janareta: RF, ikon 0-300W daidaitawa, cikakken kewaye kariya, ci gaba da dogon lokaci aiki (iska sanyaya).

5 kumaControl tsarin: PLC taɓa allon cikakken atomatik sarrafawa, ta amfani da Omron, Schneider da sauran shigo da alamun lantarki kayan aiki, akwai hannu, atomatik biyu sarrafawa yanayin, ainihin launi tashar taɓa allon, Siemens shirye-shirye mai sarrafawa (PLC), Amurka samar da injin matsin lamba ganewa tsarin, za a iya saita, gyara, sa ido kan injin matsin lamba, aiki lokaci, plasma ikon da sauran aiki sigogi, kuma yana da matsala ƙararrawa, aiki ajiya da sauran ayyuka da yawa. Saita daban-daban tsari sigogi a cikin atomatik yanayin, da danna daya fara, ci gaba da maimaita gudu. Ana amfani da yanayin hannu don gwaji da kuma gyaran kayan aiki.

Tsarin aiki:

1 kumaProcessing tsari Load kayan aiki→ pumping inji → rushing a cikin reaction gas → plasma watsa magani → rushing gas → cire workpieces

2 kumaTsarin sarrafawa:

2.1 sarrafawa lokaci iko: 1 seconds ~ 120 mintuna ci gaba da daidaitawa.

2.2 Plasma watsa matsin lamba: 30 ~ 50Pa.

2.3 ikon saiti kewayon: 0 ~ 300W ci gaba da daidaitawa.

2.4 kwararar saiti kewayon: Gas 1 (0 ~ 300ml / min) Gas 2 (0 ~ 500ml / min).

PLC software aiki (sarrafawa dubawa)

Main Screen: Real-lokaci saka idanu da kuma nuna aiki yanayin da kuma bayanai, Plasma iko iko, gas kwarara, bawul sauya, inji matsin lamba, Run lokaci da dai sauransu.

sigogi saiti: Za a iya saita, gyara tsari sigogi da matakai.

Yanayin aiki: Za a iya duba injin matsin lamba, ƙarfin plasma da sauran bayanai da yanayin online.

Rashin faɗakarwa: Multiple rashin faɗakarwa ganowa, faɗakarwa da kuma kulle kariya .

PDMS guntu-guntu binding aikace-aikace

PDMS da Slide-daukar da sakamakon

Binding bayan stripping gwaji,PDMS ba za a iya raba shi da mai ɗaukar kayan aiki ba bayan rarrabuwa, ƙarfin layin haɗin da ke gani ya fi PDMS kanta. Tsarin tsari yana da sauƙi, babban ƙimar samarwa, saurin haɗuwa da sauri, ƙarfi mai ƙarfi, ba za a zubar da ruwa ba.