Norton K6-C Multi-aiki rufi kauri mitaMultifunctional, mafi cikakken ma'auni aiki fiye da a halin yanzu a kasuwa Coating kauri gauge, za a iya zaɓi da dama daban-daban model ayyuka, saduwa da daban-daban ayyuka ma'auni.

Norton K6-C Multi-aiki Coating kauri gauge yana da wadannan ayyuka:

1, electroplating layer na karfe kayayyakin (zinc, chromium, nickel, cadmium, azurfa, tin, da sauran rufi).

2, electroplating layers na launi karfe kayayyakin (zinc, chromium, nickel, cadmium, azurfa, tin, da sauran rufi).

3, karfe kayayyakin rufi, fenti, porcelain glaze, foda, mahogany, da sauran rufi.

4, anodized oxide rufi, phosphide rufi, da sauran rufi na baƙar fata da karfe mai launi.

5, Musamman rufi rufi da kauri karfe rufi, electroplating rufi.

6, ciki surface rufi na bututu da cylindrical kayayyakin.

7, karfe takarda na buga kewaye allon.

8, electroplating rufi na m farantin da kuma rufi kayan kayayyakin da aka yi da launi mai gudanarwa kayan.

9, biyu layers bangare rufi.

10, kankare kariya layer da kuma auna karfe matsayi a cikin kankare.

11, daya karshen da biyu karshen da babban m gilashi da kuma carbon fiber karfafa filastik kayayyakin da shigarwa (ma'auni a lokacin samarwa da kuma isar da tsari).

12, auna zurfin trench, da kuma surface roughness kimantawa bayan sandblasting ko sandblasting.

13, sarrafa yanayin yanayi (iska zafi, iska da karfe surface zafin jiki, dew point zafin jiki, da kuma auna zafin jiki canji sigogi).

Norton K6-C Multi-aiki Coating kauri gauge kusan hada da aiki na a halin yanzu samuwa a kasuwa ** Coating kauri gauge, da kuma ƙarin aiki don cimma mafi kyau ma'auni kwarewa, idan kana bukatar wani karfi kayan aiki, Norton Czech wannanCoating kauri gauge iya saduwa da bukatun.

Norton K6-C Multi-aiki rufi kauri mitaAbubuwan amfani:

1, atomatik neman matsakaicin band sama iyaka da ƙasa iyaka darajar.

2, sakamakon ma'auni aka nuna a cikin samfurin kididdiga.

3. Scanning yanayin tare da saman iyaka da ƙasa iyaka darajar.

4, diagonal2.4inciTFTLauni nuni, gina-in lithium baturi.

5, daidai da ergonomic girgizar ƙasa zane, kusurwa tare da roba kariya.
6Keyboard tare da maɓallin aiki, za a iya daidaita amfani daidai da yanayin aikin na'urar; Mai amfani da dubawa friendly, intuitive.

7. Ƙarin yanayin da na'urar saitunan.

8, karamin girman wear-resistant firikwensin fadada sassa daidai da ergonomics.

9, Mai auna firikwensin da ke tallafawa halaye masu yawa na daidaitawa (donPH3Jerin bincike, * Multi goyon baya6daya; DonNF-GBincike, * Multi goyon baya4daya; DonF-GBincike, * Multi goyon baya2kuma).

Norton K6-C Multi-aiki rufi kauri mitaBasic fasaha siffofin:

auna kewayon

auna kewayon:0.5 µm–120 mm

Adadin firikwensin

Abokin ciniki zai iya zaɓar su

Hanyar Calibration

· Ƙarin daidaitawa guda ɗaya

· Biyu maki calibration

· Single Point (tare da daidaitawa ta atomatik)

Haɗin kwamfuta

tashar USB 2.0

zafin jiki range

· Don kayan aiki:-30……+40℃

· Ga firikwensin:-40……+50℃

(Don high zafin jiki firikwensin, zafin jiki zai iya zuwa+350℃）

wutar lantarki

Ginin Lithium-ion baturi,3.7–4.2 V, 1500–1700 da

Total girma

60×125×25mm

Nauyi na Electronic Unit

120g

Cikakken aiki hours

fiye da 12 hours

caji lokaci

4 sa'o'i

Garanti

Kayan aiki Host-3shekara

na'urori masu auna firikwensin-2shekara

Bayarwa Components

Kayan aiki hosts & firikwensin (adadin da model za a iya zaɓar ta abokin ciniki)

caji

Coating kauri da kuma substrate reference samfurin (bisa ga zaɓar firikwensin)

mini-USB -USB ANau'in PC Cable

Manufofin aiki

Shockproof marufi akwati

Norton K6-C Multi-aiki rufi kauri mitaSensor fasaha sigogi

Magnetic induction da kuma lantarki vortex gudu 2-a-1 bincike

FNF

Ana amfani dashi don auna rufi, foda layers, filastik layers, porcelain glaze da sauran non-conductive rufi kauri a kan conductive ferromagnetic da kuma non-ferromagnetic substrates.

Fasahar:

auna kewayon:0-1500μm (1.5mm)

Ma'auni daidaito:±(0.015T + 1) μm

Diameter na yankin auna:6mm

* Ƙananan substrate diamita: convex/yankin Φ4mm/Φ12mm

Girma: Φ21 × 90mm

Magnetic induction bincike

Ga coating kauri ma'auni na ferromagnetic substrate,K6-CdagaFJerin bincike ya ƙunshi wani calibration halaye curve.

F0

Ana amfani da shi don auna layers na electroplating (zinc, chromium, cadmium, da dai sauransu) da kuma layers na rufi (filastik, fenti, da dai sauransu) a kan kananan sassan (ƙananan radius na curvature), da kuma sassan da ke da wuya a taɓa a kan kayan ferromagnetic.

Fasahar:

auna kewayon:0-300μm（0.3mm）

Ma'auni daidaito: ±(0.02T+1) µm

Diameter na yankin ma'auni: Φ3mm

* Mini diamita na substrate: Φ4.5mm（Φ1 mm

Girma: Φ9 ×34 mm

Lura: Pen bincike; Fixed auna tsarin; * Ƙananan diamita na yankin ma'auni ba shi da tasiri daga conductivity na rufi.

F0/90

Ana amfani da shi don auna layers na electroplating (zinc, chromium, cadmium, da dai sauransu) da kuma layers na rufi (filastik, fenti, da dai sauransu) a kan kananan sassan (ƙananan radius na curvature), da kuma sassan da ke da wuya a taɓa a kan kayan ferromagnetic.

Fasahar:

auna kewayon:0-300μm（0.3mm）

Ma'auni daidaito: ±(0.02T+1) µm

Diameter na yankin ma'auni: Φ3mm

* Mini diamita na substrate: Φ4.5mm (Φ1 mm)

Girma: Φ20×127 mm

F1

Karfe rufi ne musamman dace don auna electroplating layers (zinc, chromium, cadmium, da dai sauransu) da kuma rufi rufi (filastik, fenti, da dai sauransu) a kan kananan girman sassa da aka yi da ferromagnetic kayan.

Fasahar:

auna kewayon:0-500μm（0.5mm）

Ma'auni daidaito:±(0.02T+1) µm

Diameter na yankin ma'auni: Φ4mm

* Mini diamita na substrate: Φ4.5mm (Φ1 mm)

Girma: Φ9 ×65 mm

Lura: An sanye da mai tsayayya mai bincike tare da tsarin auna bazara don sarrafa rufin lantarki, wanda ba shi da tasirin rufin lantarki.

F2

Ana amfani da nonconductive rufi (rufi, foda rufi, anodizing rufi, da dai sauransu) da kuma nonconductive rufi (zinc, chromium, da dai sauransu) a kan ferromagnetic kayan auna. auna kewayon har zuwa2milimita.

Fasahar:

auna kewayon:0-2000μm（2mm）

Ma'auni daidaito:±0.02T µm

Diameter na yankin ma'auni: Φ6mm

* Mini diamita na substrate: Φ9mm (Φ1.5 mm)

Girma: Φ19 ×83 mm

Lura: Mai bincike sanye da tsarin auna spring. Amfani da wuya karfe kayan a matsayin bincike gaba karshen, hana bincike lalacewa.

F3

Ana amfani da nonconductive rufi (rufi, foda rufi, anodizing rufi, da dai sauransu) da kuma nonconductive rufi (zinc, chromium, da dai sauransu) a kan ferromagnetic kayan auna. auna kewayon har zuwa6milimita.

Fasahar:

auna kewayon:0-6000μm（6mm）

Ma'auni daidaito:± 0.02Tμm

Diameter na yankin ma'auni: Φ8mm

* Mini diamita na substrate: Φ10.5mm (Φ2.5 mm)

Girma: Φ19 ×83 mm

Lura: Mai bincike tare da tsarin ma'auni na spring ana amfani dashi don ma'auni mai kauri.

F4

Ma'auna kauri na asphalt, filastik, karfe foil, wuta resistant kayan da sauran non-ferromagnetic rufi (ciki har da musamman zane rufi) a kan m karfe substrate surface.

Fasahar:
auna kewayon:0-8mm

Ma'auni daidaito a cikin wani range:0-6 mm：≤±（0.015T + 0.01）mm；6-8mm：≤±0.02T
* Mini substrate diamita: ciki/waje diamita Φ5 mmΦ1.5mm

Diameter na yankin auna:12mm

Girma: Φ15 × 49mm

F5

Ma'auna kauri na asphalt, filastik, karfe foil, wuta resistant kayan da sauran non-ferromagnetic rufi (ciki har da musamman zane rufi) a kan m karfe substrate surface.

Fasahar:

auna kewayon:0-10mm

Ma'auni daidaito a cikin wani range:0-8 mm：≤±（0.015T + 0.01）mm；8-10mm：≤±0.02T

* Mini substrate diamita: ciki/waje diamita Φ7/Φ44mm

Diameter na yankin auna:17mm

Girma: Φ23 × 58mm

Electrical Turbo kwararar bincike

Don ma'aunin kauri na non-ferromagnetic substrate,K6-CdagaNFJerin bincike ya ƙunshi wani calibration halaye curve.

NF0

Non-conductive rufi (rufi, foda rufi, anodizing rufi, da dai sauransu) da kuma non-ferromagnetic rufi (tin, zinc, da dai sauransu) da aka yi a kan kayan aiki da aka yi da kayan aiki masu ba da wutar lantarki ba. auna kewayon har zuwa0.5milimita.

Fasahar:

auna kewayon:0-500μm（0.5mm）

Ma'auni daidaito: ±(0.02T+1) µm

Diameter na yankin ma'auni: Φ1.5mm

Girma: Φ6 ×35mm

Lura: Haɗuwa da binciken tare da tsarin auna bazara, amfani da kayan zamani yana tabbatar da babban ƙarfi da karfe na binciken.

NF1

Non-conductive rufi (rufi, foda rufi, anodizing rufi, da dai sauransu) da kuma non-ferromagnetic rufi (tin, zinc, da dai sauransu) da aka yi a kan kayan aiki da aka yi da kayan aiki masu ba da wutar lantarki ba. auna kewayon har zuwa2milimita.

Fasahar:

auna kewayon:0-2000μm（2mm）

Ma'auni daidaito: ±0.02T µm

Diameter na yankin ma'auni: Φ4.7mm

Girma: Φ6 ×35mm
Lura: Haɗuwa da binciken tare da tsarin auna bazara, amfani da kayan zamani yana tabbatar da babban ƙarfi da karfe na binciken.

NF2

Ana amfani da shi don auna mafi kauri non-conductive rufi a kan karfe substrate.

Fasahar:

auna kewayon:0-15000μm（25mm）

Ma'auni daidaito:±0.02T µm

Diameter na yankin ma'auni: Φ20mm

* Mini diamita na substrate: Φ12mm（Φ5 mm

Girma: Φ15 ×85mm

NF3

Ana amfani da shi don auna mafi kauri non-conductive rufi a kan karfe substrate.

Fasahar:

auna kewayon:0-30mm

Ma'auni daidaito:±0.02T µm

Diameter na yankin ma'auni: Φ40mm

* Mini diamita na substrate: Φ44mm（Φ25mm）

Girma: Φ23 ×88mm

NF4

Ana amfani da shi don auna mafi kauri non-conductive rufi a kan karfe substrate.

Fasahar:

auna kewayon:0-30mm

Ma'auni daidaito:0-40mm:≤(1%±0.1)；40-70mm: 2%

Diameter na yankin ma'auni: Φ80mm

* Mini diamita na substrate: Φ270mm（Φ80mm）

Girma: Φ80 × 60mm

Lura: Binciken ya haɗa tare da tsarin auna spring. A filin aiki yanayin jure high zafi, nuna kwanciyar hankali.

Ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin ma'aunin

K6 - CPHSeries bincike ƙunshi wani "rufi/Basic "halaye curve.

PH1

Ana amfani da shi don auna electrolytic nickel, zinc da sauran electroplating rufi a kan karfe substrate.

Fasahar:

auna kewayon:0-120μm

Ma'auni daidaito: ≤ ±(0.03T + 1) µm

Diameter na yankin ma'auni: Φ4.7mm

* Mini diamita na substrate: Φ1mm

Girma: Φ12 × 40mm

Lura: Za a iya sarrafa electroplating rufi a karkashin rufi layers.

PH3

Ana amfani da shi don auna electroplating rufi (zinc, chromium, nickel, jan ƙarfe, cadmium, da sauransu).

Fasahar:PH3-0,2 || PH3-1,8

auna kewayon:0-120m40 kuma

Ma'auni daidaito: ≤ ±(0.03T + 1) ||≤±(0.03T +1) µm

Diameter na yankin ma'auni: Φ1 mm kuma1mm

* Mini diamita na substrate: Φ1 mm kuma75mm

Girma: Φ6 Yi kuma 50 mm.6 × 50mm

Lura: Za a iya sarrafa electroplating rufi a karkashin rufi layers.

** Bincike

F×P，NF×P

Ana amfani da shi don auna ferromagnetism(F)×A)da kuma non-ferromagnetic(NF)×A)Kayan da aka yi a cikin bututun.

Fasahar:

auna kewayon:0-2 μm

Ma'auni daidaito: ≤ ±( 0.02T+ 0.001)mm

Diameter na yankin ma'auni: Φ4.7mm

* Mini diamita na bututun: Φ14mm

Lura: Binciken aka tsara tare da hannu aiki yanayin. Buɗewar gefen bututun. Amfani da juriya bincike ya dogara da bututun diamita da tsawon.

FR1

Ana amfani da su don auna zurfin da kuma matsayin reinforcements a cikin kankare.

Fasahar:

auna kewayon:0-70 mm

Ma'auni daidaito: ≤ ±(0.05T + 0.1) mm

Diamita na karfe: Φ3-40 mm

Girman kankare:Dimensions: 100x30mm

Lura: Ana amfani da yanayin da aka fi girma da kuma karfe diamita.

FR2

Ana amfani da su auna kauri a kan ferromagnetic surface (kauri har zuwa120 mm) Kare rufi.

Fasahar:

auna kewayon:1-120 mm

Ma'auni daidaito: ≤ ±(0.05T + 0.1) mm

Girma:Dimensions: 180x30mm

R

Ana amfani da ma'auni na roughness bayan spraying yashi kafin painting.

Fasahar:

auna kewayon:3-300 µ m

Ma'auni daidaito: ≤ ±0.02 Rz

Girma: Φ12 × 45mm

THDC

Ana amfani da shi don auna karfe surface zafin jiki, iska zafin jiki, dangane iska zafi, dew point zafin jiki, lissafin bambanci tsakanin karfe surface zafin jiki da dew point zafin jiki (duba aiki yanayin yayin karfe kayayyakin zane).

Lura: Lokacin daTHDCLokacin da binciken ya haɗa da na'urar, nuni zai nuna bayanan da ke sama.

da

Ana amfani dashi don auna zafin jiki na iska, zafi da kuma yanayin ruwa yayin zane.

fasaha siffofin 1, auna kewayon: Air zazzabi:-10°C – +40°C Air zafi:5-90% zafin jiki:-15°C – 40°C 2Ma'auni daidaito: Air zafin jiki: ±1°C Air zafi: ≤ ±5% zafin jiki: ≤ ±2 ° C Girma: Φ15×120 mm Lura: Haɗin bincike don fadi ma'auni kewayon.