Bayanan amfani:
1. Wannan magnetic taimako lantarki lamba mita dace da auna matsin lamba na ruwa, gas, da sauransu kafofin watsa labarai da jan ƙarfe da kuma jan ƙarfe kayan aiki ba lalata tasiri. Ana amfani da kayan aiki tare da na'urorin lantarki masu dacewa (kamar relays da kuma contactors, da dai sauransu) don cimma manufar sarrafawa ta atomatik da aikawa (ƙararrawa) ga tsarin matsin lamba da aka auna (sarrafawa).
2. Kayan aiki kafin shigarwa dole ne a duba samfurin, ƙayyadaddun bayanai da kuma bincika idan nuna alama yana a sifili, idan aka gano cewa samfurin bai dace ba ko nuna alama ya ɓace daga sifili, ya kamata a gano dalilin bayan maye gurbinsa ko sake dubawa.
3.The kayan aiki ya kamata a shigar a kewaye muhalli (ko matsakaicin kafofin watsa labarai) zafin jiki ne -40 ~ + 70 ℃, dangi zafi ba fiye da 85%, da kuma m bugun jini na rawar jiki ko matsin lamba da aka auna don amfani a karkashin wani m muhalli kamar amintaccen aiki da kuma daidai karatu.
4.The kayan aiki ya kamata a tsaye shigar da kuma yi ƙoƙari ya kiyaye wannan mataki matsayi tsakanin matsin lamba maki, in ba haka ba, dole ne a lissafa daidai da ƙarin kuskure da aka haifar da ruwa matakin bambanci.
5. Bayan an saita da kuma kammala layin lantarki na kayan aiki, ya kamata a bincika shi da hankali, kuma bayan gwajin aiki za a iya amfani da shi.
6. A lokacin daidaita saiti darajar, kayan aiki ya kamata a yi ta amfani da keɓaɓɓun maɓallin (kayan haɗi).
7.The kayan aiki a lokacin auna kwanciyar hankali matsin lamba, za a iya amfani da shi a cikin kewayon 1/3 ~ 2/3 na madaidaicin iyakar darajar; Lokacin auna matsin lamba na canji, ya kamata ya dace da 1/2 da ba ya fi iyakar iyakar sikelin; Don aunawa a cikin wani lokaci, an ba da izinin amfani da 3/4 na iyakar iyakar sikelin, amma ba a ƙarƙashin wannan iyakar a lokacin auna mummunan matsin lamba (watau inji).
8. A yayin amfani da kayan aiki, ya kamata sau da yawa kiyaye bushewa da tsabta, da kuma kula da shi yadda ya kamata.
9.The kayan aiki a cikin al'ada amfani da yanayin, ya kamata a lokaci-lokaci duba, yawanci a cikin kowane watanni uku dubawa ne mai dacewa. Kamar yadda kayan aiki ba zato ba tsammani ya kasance (spring bututu saboda leakage, karya ya haifar da matsin lamba, touch hadewa ko tasirin lamba saboda mummunan oxidation, mai nuna alama faduwa, sauƙaƙe ko nuna karkatarwa da sauran abubuwa), dole ne a gyara nan da nan, kuma a iya amfani da shi bayan dubawa.
10.The kayan aiki bayan dogon lokaci amfani, kamar yadda aka gano haɗin aiki kuskuren karuwa, ko lamba m aminci, za a iya daidaita kananan lantarki haɗin na'urar magnetic ginshiƙi zuwa mai gudanarwa allura nesa, don dacewa kara magnetic karfi, idan tabbatar da magnetic ginshiƙi ya zama m raguwa, ya kamata a cire shi bayan maye gurbin.
11. A lokacin amfani da kayan aiki ko gyara, ya kamata a haɗa wayoyin (ƙasa) wayoyin da ke cikin akwatin waya don tabbatar da aminci.

Main fasaha nuna alama:

Sunan	samfurin	Nominal diamita mm	Daidaito Rating	Touch ikon VA	Ma'auni kewayon Mpa	Haɗa thread
Electric lamba matsin lamba mita	YX-60	Φ60	2.5	10	0.1,0.16,0.25, 0.4,0.6,1,1.6, 2.5,4,6,10,16, 25,40,60 -0.1~0,-0.1~0.06, -0.1~0.15,-0.1~0.3, -1~0.5,-0.1~2.4	M14X1.5
	YX-100	Φ100	1.6	10		M20X1.5
	YX-150	Φ150	1.6	10		M20X1.5
	YXC-100	Φ100	1.6	30		M20X1.5
	YXC-150	Φ150	1.6	30		M20X1.5
	YX-100ZT	Φ100	1.6	10		M20X1.5
	YX-150ZT	Φ150	1.6	10		M20X1.5
	YXC-100ZT	Φ100	1.6	30		M20X1.5
	YXC-150ZT	Φ150	1.6	30		M20X1.5
	YNXC-100ZT	Φ100	1.6	30		M20X1.5
	YNXC-150ZT	Φ150	1.6	30		M20X1.5
	YNXC-100	Φ100	1.6	30		M20X1.5
	YNXC-150	Φ150	1.6	30		M20X1.5
	YAXC-100	Φ100	1.6	30		M20X1.5
	YAXC-150	Φ150	1.6	30		M20X1.5