● Tsarin siffofin
1, bututun irin hadedden rami panel: Yana ba tare da la'akari da bututun diamita girman, da sama da ƙasa da matsa matsa rami cibiyar da aka kasance a kowane inci daya daga biyu bangarorin rami panel karshen saman, mai tacewa tsarin yau da kullun amfani da wannan nau'i.
2, grip-irin hadewa rami panel: Yana da yawa amfani saboda cimma da zobe dakin matsin lamba, inganta ma'auni daidaito, rage mafi ƙarancin line bututun sashi tsawon da ake bukata a lokacin shigarwa.
● Ayyukan fasali
1. Tsarin ne mai sauƙin kwafi, mai sauƙi da ƙarfi.
2.Stable aiki da karfi, low farashi, da kuma dogon lokacin amfani.
3. Standard nau'in rami allon amfani da kasa da kasa misali lissafi da kuma aiki, za a iya ba tare da bukatar ainihin halin yanzu daidaitawa.
4. Single mataki current (ruwa, gas, tururi) duk za a iya auna.
5. Amfani da mai hankali bambancin matsin lamba mai watsawa, high daidaito, ma'auni za a iya shirya kansa.
6.Smart hadewa rami allon kwarara mita iya nuna lokaci guda tara kwarara, nan take kwarara, matsin lamba, zafin jiki.
7. sanye da HART sadarwa dubawa, high kwanciyar hankali.

Nominal diamita: DN25 ~ DN1000 (mm)
Daidaito: ± 1.0% FS, ± 1.5% FS
Ma'aunin rabo: Standard 1: 3; Ƙara 1: 5
Aiki matsin lamba: ≤25MPa
Matsakaicin zafin jiki: -40 ℃ -450 ℃
Matsakaicin kafofin watsa labarai viscosity: ≤30CP (daidai da nauyi man fetur)
Beta darajar: 0.2-0.8
Hanyar haɗi: Flanged, Clamped
Matsa lamba Hanyar: Ring matsa lamba, inch matsa lamba
Shigarwa hanya: kwance ko tsaye
Wutar lantarki: 24V DC (yana buƙatar mai watsawa mai ƙarfin lantarki)
Nuni: 8-bit LCD nuna nan take kwarara, tara kwarara (tare da kwarara accumulator)
fitarwa sigina: (1) 4-20mA DC kwarara sigina (2) fitarwa sigina daidai da HART yarjejeniya
Fashewa-resistant aiki: IbIICT5
Kare aiki: IP65

1. bututun diamita, bango kauri, kayan
2. auna kafofin watsa labarai
3. Matsakaicin zafin jiki (℃)
4.Media aiki matsin lamba (MPa): Max matsin lamba, al'ada matsin lamba, m matsin lamba
5. kafofin watsa labarai aiki kwarara: Max kwarara, al'ada kwarara, m kwarara
6. kafofin watsa labarai aiki viscosity (mPa.s)
7. Matsakaicin kafofin watsa labarai (kg / m3)
8.Allow matsin lamba hasara
9.Field bututun laying yanayi da kuma gida juriya sassa siffar.

1. Kafin shigarwa da rami allon ya kamata a hankali duba misali rami allon lambar, bit lambar, bayanan da suka dace da bututun yanayin, kwarara kewayon da sauran sigogi.
2. sabon bututun hanyar tsarin, dole ne a fara wanke, sweep waya bayan shigar da rami allon, don kare bututun ciki sharar gida toshewa ko lalacewa rami allon.
3. Tsakiyar rami allon ya kamata ya kasance coaxial da bututun tsakiya, da kuma coaxiality kuskure ba zai wuce ± [0.015 * (1 / β) -0.015]. Har ila yau da kullum karshen jirgin sama ya kamata a tsaye da bututun, kuskuren ba zai wuce ± 1 °.
4. Lokacin da rami panel shigarwa, gasket ba za a shiga cikin bututun ciki bango bayan clamped.
5. Ramin panel shigarwa dole ne tsauri, ba a yarda da wani leakage. Bayan shigarwa, yi gwajin matsin lamba.
6. rami panel kwarara mita gaba da baya don shigar da bawul, shi ne mafi kyau zabi ƙofar bawul da kuma buɗe duka a lokacin gudu; Daidaitawa bawul ya kamata ya kasance a cikin bututun da ke ƙasa bayan 5DN.
7. Lokacin auna ruwa kwarara matsin lamba bututun matakin sashi ya kamata a cikin wannan matakin matakin. Idan an shigar da cutters a kan madaidaicin bututun, matsin lamba short bututun tsakanin wani nesa (madaidaicin layi shugabanci), wannan yana da tasiri a kan sifili maki na bambancin matsin lamba mai watsawa, ya kamata a gyara ta hanyar "sifili maki hijira".
8. A cikin matsin lamba bututun dole ne koyaushe kiyaye single-phase ruwa jihar. Lokacin da aka auna ruwa ne gas, a cikin matsin lamba bututun (ciki har da matsin lamba na bambancin matsin lamba gauge) ne duk gas phase; Lokacin da aka auna ruwa ne ruwa, a cikin bututun matsin lamba duk ruwa ne, ba za a iya samun kumfa ba.
9. Reduction na'urar a kan, kasa gefen don tabbatar da wani tsawon kai tsaye sassa, takamaiman bukatun duba da teburin da ke ƙasa: