Sunan samfurin: Abinci injin marufi na'ura (PLC kwamfuta shirye-shirye)

Main tsari da kuma aiki ka'idodin

Wannan injin ya ƙunshi manyan sassa biyar na saman studio, ƙasa aiki dandamali, rack, lantarki tsarin, inji tsarin, duba cikakken hoto. Injury famfo pumped daga studio lokacin da

Aiki tsari:Da farko rufe,

dakatar da aiki, matsin lamba bawul bude, iska kwamfuta inflatable, atomatik saki gas bude rufi kammala aiki sake zagayowa. Bayan rufewa cikakken sauke bawul don buɗewa,

1. Taidaitawa da Amfani

   1Shirye-shiryen kafin amfani

   a, Machine sanya daidai, duba idan rufin ya yi daidai, Ka tsalle ta atomatik bayan saki,DZ -400/2L;Nau'in, daidaitawa studio kasa daidaitawa bolt sa sata iya tsalle ta atomatik, amma tsalle karfi ba zai iya da yawa;DZ-400/2S. D2-500/2S. D2-600/2S. DZ-800/2SModel ne daidaita hagu da dama screwdriver.

   daKayan aiki don daidaitawa da buƙatun injin.

   a.Duba ko matsayin injin famfo man fetur ne daidai idan ba daidai ba ya kamata a daidaita(Duba injin famfo umarnin)”

   da, da kyau ƙasa da na'urar.

   a.Connect ikon samarwa, bude ikon sauya, full rufi, duba idan injin famfo aiki yadda ya kamata(Idan ba a pump gas, ya kamata a canza kowane biyu layi a cikin uku mataki wutar lantarki).

   2Taidaitawa kafin amfani

   a, Zaɓi injin digiri

   Pumping lokaci ne0-60Seconds bayyananne ci gaba da daidaitawa, kananan inji inji, pumping lokaci ne dijital juyawa iri0-99Seconds daidaitawa, daidaita tsawon lokacin pumping, don haka ya kai da ake so inji darajar.

   daZaɓi zafin jiki

   Dangane da marufi kayan zaɓi da ake so dumama zafin jiki, daidaita dumama zafin jiki knob zuwa daidai matsayi, high ko matsakaici low.

   A.Daidaita dumama lokaci

   dumama lokaci0-9.9Seconds bayyane ci gaba da daidaitawa, daidaita dumama lokaci knob bisa ga amfani da marufi kayan da kuma dumama zafin jiki, zaɓi dace dumama lokaci(Mini injin inji na dijital juyawa0-30Seconds daidaitawa) .

   da、Zaɓi kalmomin silicone na rufi na silicone roba kamar yadda ake buƙata, saita rubutun rufi na ranar da sauran haruffa,

   3.Amfani

   a、 Bude wutar lantarki sauya:

   da、 Turn marufi jakar matsa lamba da kuma sanya marufi jakar da aka shirya abubuwa(abubuwa zuwa bakin ba za su kasa da4santimetar)Ka sanya a cikin studio, da kuma rufi a kan silicon roba bar, jakar ba overlap, juya marufi jakar matsa lamba bar da kuma marufi bakin matsa lamba da kyau;

   A, riƙe hannu(Matsa a kan studio zuwa matsa a kan rufi gefen. A rufe, sa'an nan injin zai ta atomatik kammala injin marufi tsari da tsari da kuma ta atomatik bude amfani, wasu kayan aiki sanye da gaggawa dakatar sauya:

   da、 juya marufi jakar matsa lamba, cire marufi jakar, wato kammala aiki madauki daya,

   2

   daLokacin dakatar da aiki, kashe wutar lantarki, cire wutar lantarki,

   4Cikakken atomatik injin marufi injin ban da yin shirye-shiryen da ke sama:
   A、Daidaita lokacin watsawa bisa ga gudun aiki na atomatik na studio a kan kayan aiki da kuma gudun aiki na ma'aikata, daidaita gudun kayan aiki,(Lokaci Ƙara ko rage tsakanin).
   da、Wannan na'urar yana da gaggawa dakatar da motoci canja, idan akwai wani yanayi na musamman danna wannan canja, sama rufi ta atomatik bude wuri a sama, domin yanayin da aka cire, bude gaggawa dakatar da motoci canja, tura sama rufi zuwa aiki gefen, na'urar shiga al'ada aiki yanayi