Bayanan samfurin

Moore Nanotechnology Systems 140GPM gilashi molder ne musamman don daidaito gani gilashi yankin. 140GPM tare da kayan aikin kayan aiki na 450UPL mai daidaito mai daidaito mai daidaito mai daidaito ko 350FG mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito mai daidaito Saboda haka, 140GPM ne super daidaitaccen gilashi molding inji. 140GPM aiki yankin diamita ne 140mm. Injin kayan aiki za a iya zaɓar daidaita Multi-hole molding hanyar da kuma cikakken atomatik lodawa ko rarraba molding hanyar, don haka saduwa da babban adadin aiki bukatun.

Advanced 140GPM sanye da GPMSim musamman(SB SE)FEA kunshin don hasashen da kuma nazarin yanayin aiki a lokacin gilashin gilashi. Abubuwan musamman na GPMSim software sun haɗa da: mai sauƙin aiki mai aiki wanda ke ƙirƙirar ƙwaƙwalwar matsin lamba mai sauƙi da sauƙin kirawa da ƙayyade bayanan gilashi da ƙirar daga bayanan kayan da aka gina. Software zai iya ta atomatik samar da wani huɗu-gefe grid rarraba taswira da kuma kwaikwayon gilashi molding 5 matakai lissafi molding sakamakon, wato dumama, liquefaction, matsa lamba da kuma biyu sanyaya (daya ne annealing sanyaya, daya ne sauri sanyaya). Sauran ayyukan hasashen sun haɗa da: matsin lamba na gilashi, yawan karkatarwar gilashi, da yawan raguwa na kayan gilashi.

Injin kayan aiki Features

• m kabinet daidaito gilashi mold inji, aiki diameter 140mm

• Za a iya amfani da single ko multi-hole mold

• Mai jituwa tare da m mold na'urori

• Kwamfuta cikakken lokacin sarrafawa da kuma matsin lamba sarrafawa da aka haɗa dumama da sanyaya zagaye

• tushen shirin tushen Windows tsarin da kuma amfani da sauki aiki touch allon

• Matsakaicin zafin jiki ya kai 800 ℃

• Injin kayan aiki na molding zai iya aiki a cikin inji ko yanayin inert gas

• Matsakaicin matsin lamba ne 25kN

T1 dumama lokaci: mold da gilashi dumama zuwa <unk> TG. Nitrogen bushe a cikin rumbun don hana mold oxidation.

T2 insulation lokaci: kiyaye zafin jiki zuwa daidaitacce yanayi.

T3 zafi matsin lamba lokaci: matsin lamba tashi har sai ya kai da aka tsara matsin lamba darajar.

t4 hankali sanyaya lokaci: hankali sanyaya zuwa takamaiman zafin jiki (damuwa zafin jiki), amfani da nitrogen sarrafa sanyaya dukan tsari.

T5 sauri sanyaya lokaci: sauri sanyaya sararin samaniya zafin jiki ta hanyar kara nitrogen kwarara.

daidaito siffar

Tungsten Carbide kayan aiki 0.081μm PV

Matsa gilashin ruwan tabarau 0.122μm PV

Surface tsabtace

Tungsten Carbide kayan aiki 1.27nm R

Gidan gilashin ruwan tabarau 1.51nm Ra

Lura: Bayanan alamomi ba za su iya canzawa ba tare da sanarwa ba saboda ci gaban ci gaban kayayyaki da fasaha.